|
MACHINE TOOLS (CHIP MAKING)
|
(2) 10" Chucks, 4,500 RPM, 20 HP, Dual independent turrets, Fanuc 18i-TB CNC.
| Specifications and Equipment |
| |
| Swing over bed: |
15.75" |
| Swing over cross slides: |
11.5" |
| Maximum turning diameter: |
13.78" |
| Maximum turning length: |
7.87" |
| Hole through spindles: |
3.94" |
| Bar capacity (each spindle): |
3.5" |
| Spindle speeds (each spindle): |
45 to 4,500 RPM |
| Spindle drive motors: |
2 X 20 HP AC |
| Tool turrets: |
2 X 10 Tools |
| Turret index time: |
0.2 Seconds (single station index) |
| CNC Type: |
Fanuc 18iTB |
| Gantry loader system: |
Okuma and Howa HG-25A with turn-over station and dual 16 position stockers. |
| Ganty loader capacity: |
10" Dia. X 4.7" Length X 17.6 pounds per work-piece. |
| Additional features: |
(2) 10" 3-Jaw universal hydraulic thru-hole chucks, Dual chip conveyors, Universal voltage transformer for incoming AC power. |
| Currently under power: |
Yes |
|
| |
| NOTES |
| |
| Note: |
This Okuma - Howa 2SP-25HG Dual Spindle Chucking Lathe with Fanuc 16iTB CNC has very low hours of use, and may be seen under power in the USA. For quote with price, please call Mark, Scott or Jordan at 773-866-9600. ...or, just click the "email a full quotation" icon above. |
|
| |
|
|
Click for video:
|
|
